Assembly Instructions - Bed Frames

​

1. Open all packaging, you should have the following items:

   1. Headboard,

   2. Footboard,

   3. Two side rails

   4. Centre support (s)

   5. One set of wooden slats

   6. Bed Legs

2. Lay all the pieces where the bed needs to be assembled, screw the feet where provided as part of the design.

3. Stand the headboard upright and unscrew the nuts on the Metal Brackets just enough for the side rail brackets to slot in from the top and hand tighten at this stage.

4. Now stand the headboard and unscrew the nuts and slot in the other end of the side rails and again hand tighten the same.

5. Place the centre support in the pre-attached brackets on both head and footboard

6. Place the wooden slats evenly spread from head to foot.

7. Once the slats are in it will result in bed to be square.

8. Once you are happy that the bed is square, tighten the nuts on both head and footboard.

9. The bed is ready to receive the mattress.

 

 

If you have any issues while following the instructions, please feel free to call on 07912074527 and we will be more than happy to help.

​

Assembly Instructions - Divan Ottomans

1. Open all packaging, you should have the following items:

   1. Bases x 2 Pieces (If its a Single Bed then only One Piece)

   2. Headboard (if bought as a set),

   3. Mattress (if bought as a set)

   4. Legs and Fixings. (Attached to each Base)

2. Lay the base on the floor on its side and attached the Legs, they simply push in and you should hear a click sound to show they are in.

3. At the same time push the U-Clip Upwards from the bottom to attach the two bases together, in case of Divan Ottomans, The U-Clips are to be pushed in from top to attach the bases together. Please ensure the Square edges are facing each other and the round corners are towards the Head and Foot End.

4. For Ottoman Beds, at this stage you will have to open the lids and attach the Gas Struts. One side of the struts is already attached and the other goes on to the bolt on the lid. Once in place, tighten the bolts securely.

5. IMPORTANT. Do not close the lid without the mattress, as the gas struts are designed to work with the weight of the mattress. Operating the Lids without mattress can result in injury and damage to the lid mechanism.

6. You can attach the Headboard using the fixing provided, and in case of ottomans, use the black spacers between the Headboard and Base. This allows the lid to open and shut without touching the Headboard.

7. The bed is ready to receive the mattress.

​

If you have any issues while following the instructions, please feel free to call on 07912074527 and we will be more than happy to help.